Pulsed MIG Machines - REHM WELDING TECHNOLOGY - United Kingdom Website

PANTHER 200 PULS
BROCHURE
200A

Stepless Control Pulsed MIG Machine 200 Amps
230v 1-Phase Supply
Portable

• 200 Amps
  

• 230v 1-Phase input supply
  

• Excellent ignition properties
  

• Stable arc
  

• Integrated database of 49 programs
  

• FE / CrNi / AlMg / AlSi / CuSi3 / CuAl8
  

• 4 Manual Welding Programs
  

• Digital processor control with synergic characteristic curves
  

• Standard 2 step and 4 step operation mode plus Interval and spot welding
  

• Push Pull Torch option
  

• Pre Programmed Welding Choke with manual overide
  

• Arc Length Correction
  

• Job Save function
  

• Weighs only 20 kg
  

Don't settle for anything less:

• 15 to 200 amps @35% duty cycle
  

• Digital display for equipment validation
  

ADC Technology  -  Electronic Pre-Programmed Welding Choke

• Innovative pre programmed electronic welding choke, for excellent ignition properties and a stable arc.
  

• The choke setting can also be adjusted manually for correction if required.
  

CCM  - Characteristic Curve Memory

• The comprehensive, integrated welding parameter database (CCM) contains the knowledge of experts with many years of practical experience.
  

• The combination of material, wire diameter and voltage level is used to pre-select the synergic parameters required for a successful welding process.
  

• During welding, the actual values are constantly compared to the process specifications and, if necessary, corrected instantly by the machine.
  

MI - Machine Interface

• Sets the welding energy using the material thickness, Amperage or Wire Feed Rate
  

All  the appropriate welding parameters are then selected automatically by the machine.

MEGAPULS 250
BROCHURE
250A

Stepless Control Pulsed MIG Machine 250 Amps
3-Phase Supply   16A
Portable

• 250 Amps
  

• MIG/MAG Pulse Welding
  

• MIG/MAG Double Pulse Welding
  

• MIG/MAG Conventional Welding
  

• TIG (Lift-Arc) Welding
  

• MMA (Manual Metal Arc) Welding
  

• Excellent ignition properties
  

• Stable arc
  

• Integrated database of programs
  

• Job Memory - Save up to 100 jobs
  

• Digital processor control with synergic characteristic curves
  

• Standard 2 step and 4 step operation mode plus spot welding
  

• Electronic DIGITAL control and regulation of wire feed system
  

• Wire Feed System with 4-Roll Drive and D300 wire capacity
  

• Dynamic Induction
  

• Low Weight of just 35 kg
  

Don't settle for anything less:

• High duty cycle of 40%
  

• Three standard 7-segment displays for equipment validation
  

SMC® Technology  -  Smart Machine Control

• The revolutionary Smart Machine Control is a unique regulation concept developed by REHM in a stepped system: The arc length is not only controlled by measuring the arc voltage and the welding current, but also by digital capture of the wire feed rate.
  

SDI Technology  -  Stepless Dynamic Induction

• Innovative electronic welding choke with ultra-fast automatic regulator, for excellent ignition properties and an extremely stable arc.
  

• The choke setting can also be adjusted manually using the stepless controls.
  

RSC  -  Realtime Speed Control

• The digital monitoring and regulation of the wire feed rate, extremely precise and in real-time.
  

CCM  - Characteristic Curve Memory

• The comprehensive, integrated welding parameter database (CCM) contains the knowledge of experts with many years of practical experience.
  

• The combination of material, wire diameter and voltage level is used to pre-select the synergic parameters required for a successful welding process.
  

• During welding, the actual values are constantly compared to the process specifications and, if necessary, corrected instantly by the machine.
  

RMI - REHM Machine Interface

• Sets the welding energy using the material thickness alone
  

• All  the appropriate welding parameters are then selected automatically by the machine.
  

MMI  -  Manual Machine Interface

• Allows the operator to set up the welding parameters completely by himself
  

MEGAPULS
BROCHURE
300 to 500A

Stepless Control Pulsed MIG Machine 300 to 500 Amps
3-Phase Supply

• 300 / 400 and 500 Amp versions
  

• Excellent ignition properties
  

• Stable arc
  

• Integrated database of different programs for a range of materials
  

• Digital processor control with 101 synergic characteristic curves
  

• Standard 2 step and 4 step operation mode plus spot welding
  

• Totally DIGITAL Pulsed Power Source
  

• Single and Double Pulsing
  

• Integrated Powerful Water Cooler
  

Don't settle for anything less:

• Extremely high duty cycles
  

• Two standard Digital displays for equipment validation
  

MEGAPULS 300 to 500

• Wide range of uses from MIG/MAG single and double pulsed arc welding, MIG/MAG conventional welding, MIG brazing to MMA stick electrode welding for all standard materials, such as non-alloyed and alloyed steels, special steels, aluminium and galvanized sheet steel.
  

• Maximum economic efficiency can be achieved thanks to practically spatter-free welding.
  

Perfect welding results thanks to:

• Super-fast reacting, precise, digital arc length control
  

• Controlled droplet transfer
  

• Maximum reproducibility and setting precision of the digital current source
  

• Automatic ignition, welding and crater filling programs for every material
  

• Memory for up to 63 application-specific settings
  

• The right synergy characteristic for every material
  

• Automatic correction possibility for all voltage-dependent values of the synergy/welding characteristics when different intermediate hose bundle lengths are used (1.4m, 5m, 10m and 15m)
  

Very simple operation thanks to:

• Single-button control , with the welding energy as leading variable,
  

• Synergy control providing the welding process with optimum values at all times
  

Machine Set Up

• Simple, yet effective initial set up of machine.
  

Just select:Wire DiameterWire TypeGas Typeand then close the door and let the powerful 4 wheel drive motor do the rest!


Machine Control

• The Machine Control is one of the simplest controls of any pulsed MIG welding machine.  This offers the welder unparrallelled ease of use.Welders used to normal Mig machines will find our operating concept extremely easy to use and to relate to.
  

RSC  -  Realtime Speed Control

• The digital monitoring and regulation of the wire feed rate, extremely precise and in real-time.
  

CCM  - Characteristic Curve Memory

• The comprehensive, integrated welding parameter database (CCM) contains the knowledge of experts with many years of practical experience.
  

• The combination of material, wire diameter and voltage level is used to pre-select the synergic parameters required for a successful welding process.
  

• During welding, the actual values are constantly compared to the process specifications and, if necessary, corrected instantly by the machine.
  

RMI - REHM Machine Interface

• Sets the welding energy using the material thickness alone
  

• All  the appropriate welding parameters are then selected automatically by the machine.
  

MMI  -  Manual Machine Interface

• Allows the operator to set up the welding parameters completely by himself
  

TWFU - Twin Wire Feed Unit

• The MEGAPULS can be ordered with Twin Wire Feed Units, allowing the machine to be independantly set up with two types of wire and gas.Often used to keep Aluminium wire feeder separate and un contaminated from Steel wire feeder.  Also used to minimise downtime when changing diferent wire types.