SYNERGIC.PRO² - REHM WELDING TECHNOLOGY - United Kingdom Website

SYNERGIC.PRO²
BROCHURE
170 to 450A

Step Switched MIG Machines from 170 Amps to 450 Amps
1-Phase and 3-Phase Supply

SYNERGIC.PRO²
BROCHURE
500 and 600A

Step Switched MIG Machines from 500 Amps to 600 Amps
3-Phase Supply

SYNERGIC.PRO²

170-2

190-2

230-2 AM
230-4 QUATTRO-MIG

280-2
280-4

310-4

• 170 to 310 Amps
  

• Excellent ignition properties
  

• Stable arc
  

• Integrated database with over 500 different programs
  

• Digital processor control with synergic characteristic curves
  

• Standard 2 step and 4 step operation mode plus spot and intervall welding
  

• Electronic DIGITAL control and regulation of wire feed system
  

• Dynamic Induction
  

Don't settle for anything less:

• Extremely high duty cycle
  

• Two standard 7-segment displays for equipment validation
  

SMC® Technology  -  Smart Machine Control

• The revolutionary Smart Machine Control is a unique regulation concept developed by REHM in a stepped system: The arc length is not only controlled by measuring the arc voltage and the welding current, but also by digital capture of the wire feed rate.
  

SDI Technology  -  Stepless Dynamic Induction

• Innovative electronic welding choke with ultra-fast automatic regulator, for excellent ignition properties and an extremely stable arc.
  

• The choke setting can also be adjusted manually using the stepless controls.
  

RSC  -  Realtime Speed Control

• The digital monitoring and regulation of the wire feed rate, extremely precise and in real-time.
  

CCM  - Characteristic Curve Memory

• The comprehensive, integrated welding parameter database (CCM) contains the knowledge of experts with many years of practical experience.
  

• The combination of material, wire diameter and voltage level is used to pre-select the synergic parameters required for a successful welding process.
  

• During welding, the actual values are constantly compared to the process specifications and, if necessary, corrected instantly by the machine.
  

RMI - REHM Machine Interface

• Sets the welding energy using the material thickness alone
  

• All  the appropriate welding parameters are then selected automatically by the machine.
  

MMI  -  Manual Machine Interface

• Allows the operator to set up the welding parameters completely by himself
  

230-4 QUATTRO-MIG

• The QUATTRO-MIG is equipped with additional synergy characteristic curves for aluminium materials, this special quattro-mig version of the SYNERGIC.PRO² is recommended for the welding of Aluminium with particularly thin filler wires.
  

SYNERGIC.PRO²
250-4
300-4
300-4 S
350-4
350-4 W
350-4 WS
450-4
450-4 S
450-4 W
450-4 WS

• 250 to 450 Amps
  

• Excellent ignition properties
  

• Stable arc
  

• Integrated database with over 500 different programs
  

• Digital processor control with synergic characteristic curves
  

• Standard 2 step and 4 step operation mode plus spot and intervall welding
  

• Electronic DIGITAL control and regulation of wire feed system
  

• Dynamic Induction
  

• W   model includes WATER COOLING
  

• S   model includes SEPARATE WIRE FEEDER
  

• WS   model includes Water Cooling with Separate Wire Feeder
  

Don't settle for anything less:

• Extremely high duty cycle
  

• Two standard 7-segment displays for equipment validation
  

SMC® Technology  -  Smart Machine Control

• The revolutionary Smart Machine Control is a unique regulation concept developed by REHM in a stepped system: The arc length is not only controlled by measuring the arc voltage and the welding current, but also by digital capture of the wire feed rate.
  

SDI Technology  -  Stepless Dynamic Induction

• Innovative electronic welding choke with ultra-fast automatic regulator, for excellent ignition properties and an extremely stable arc.
  

• The choke setting can also be adjusted manually using the stepless controls.
  

RSC  -  Realtime Speed Control

• The digital monitoring and regulation of the wire feed rate, extremely precise and in real-time.
  

CCM  -  Characteristic Curve Memory

• The comprehensive, integrated welding parameter database (CCM) contains the knowledge of experts with many years of practical experience.
  

• The combination of material, wire diameter and voltage level is used to pre-select the synergic parameters required for a successful welding process.
  

• During welding, the actual values are constantly compared to the process specifications and, if necessary, corrected instantly by the machine.
  

RMI  -  REHM Machine Interface

• Sets the welding energy using the material thickness alone
  

• All  the appropriate welding parameters are then selected automatically by the machine.
  

MMI  -  Manual Machine Interface

• Allows the operator to set up the welding parameters completely by himself
  

• 500 to 600 Amps
  

• Excellent ignition properties
  

• Stable arc
  

• Integrated database with over 500 different programs
  

• Digital processor control with synergic characteristic curves
  

• Standard 2 step and 4 step operation mode plus spot and intervall welding
  

• Electronic DIGITAL control and regulation of wire feed system
  

• Dynamic Induction
  

• W   model includes WATER COOLING
  

• S   model includes SEPARATE WIRE FEEDER
  

• WS   model includes Water Cooling with Separate Wire Feeder
  

• Robust Design - Tubular Framework with Integrated Crane Eyes
  

• Heavy Duty Water Cooling
  

• Powerful 48 volt motor drive for wire feeder
  

• Fine Step Voltage Adjustment
  

• Flux Cored Wire programes for Steel, Stainless Steel and Aluminium
  

• Integrated Gouging Function for welding and gouging with a single power source
  

Don't settle for anything less:

• Extremely high duty cycle - 60% guaranteed!
  

• Two standard 7-segment displays for equipment validation
  

SMC® Technology  -  Smart Machine Control

• The revolutionary Smart Machine Control is a unique regulation concept developed by REHM in a stepped system: The arc length is not only controlled by measuring the arc voltage and the welding current, but also by digital capture of the wire feed rate.
  

SDI Technology  -  Stepless Dynamic Induction

• Innovative electronic welding choke with ultra-fast automatic regulator, for excellent ignition properties and an extremely stable arc.
  

• The choke setting can also be adjusted manually using the stepless controls.
  

RSC  -  Realtime Speed Control

• The digital monitoring and regulation of the wire feed rate, extremely precise and in real-time.
  

CCM  - Characteristic Curve Memory

• The comprehensive, integrated welding parameter database (CCM) contains the knowledge of experts with many years of practical experience.
  

• The combination of material, wire diameter and voltage level is used to pre-select the synergic parameters required for a successful welding process.
  

• During welding, the actual values are constantly compared to the process specifications and, if necessary, corrected instantly by the machine.
  

RMI - REHM Machine Interface

• Sets the welding energy using the material thickness alone
  

• All  the appropriate welding parameters are then selected automatically by the machine.
  

MMI  -  Manual Machine Interface

• Allows the operator to set up the welding parameters completely by himself