TIGER - REHM WELDING TECHNOLOGY - United Kingdom Website
Main menu
- Home Page
- REHM
-
MIG Welding
- Switched MIG
- Stepless MIG
- Pulsed MIG
- MIG Welding Torches
-
TIG Welding
- TIG 1-Phase 230v
- TIG 3-Phase 400v
- NEW DIGITAL TIG
- Tungsten Grinding
- MMA Welding
- PLASMA Cutting
- CONTACT Us
TIGER
TIG
Inverter Powered TIG Welding Machines
TIGER 170 DC
TIGER 210 DC
TIGER 170 AC/DC
TIGER 210 AC/DC
Power Output Power Input
3 to 170Amps 230v 1-
3 to 210Amps
We also have DC TIG welding with Lift Arc on our BOOSTER.PRO 170 and 210 machines
The TIGER Range includes the following features:
The Tiger range offers the user exceptional arc characteristics and control.
All machines will weld at an incredible 3 amps. This coupled with separate control of the Ignition Energy and start current, allow arc striking on the very edge of the thinest of materials.
Our most demanding machine, the 210A AC/DC model, will weld at 210 amps with a 50% duty cycle from a 13 amp UK domestic plug. You can also run an extention lead of up to 100m without effecting the current output!
Intelligent Ignition Control -
Ignition energy is infinitely variable between 10% and 99% of the welding current for perfectly smooth arc ignition on both HF and Lift- Arc, offering exceptional control when welding thin materials at low amperage.
Selectable HF Ignition Control -
Allows you to tackle the smallest of jobs, even in sensitive electronic and computer environments, offering HF Ignition (which is switched off once the arc is established in both AC and DC modes), Lift- Arc Ignition which establishes the arc without using any HF, allowing for example, the repair of sensitive CNC equipment in hospitals which would normally risk being damaged by high- voltage.
Intelligent Start Current Control -
The start current is infinitely variable between 10% and 99% of the welding current for perfectly smooth arc starting on both HF and Lift- Arc, offering exceptional control when welding thin materials at low amperage. Often used with Intelligent Ignition Control.
Pulse Control as standard -
Reduced heat input and increased weld quality and control. Especially useful when welding thin materials. Both conventional and high frequency pulsing is available.
Standard Pulsing -
High Frequency Pulsing -
High frequency pulsing offers a pulse frequency of between 50 Hz and 500 Hz.
Fully Programmable -
The operator can store up to 99 programs, offering total repeatability and job selection at a touch of a button
Dual Wave Mode -
For the welding of Aluminium. This new patented process allows far greater control of the weld pool when welding Aluminium out of position and results in significant quality improvements. (AC/DC Machine Only)
AC Wave Balance Control -
Wave balance can be adjusted from - 80% to +80% allowing the arc to be influenced to enhance greater cleaning or penetration during the welding of Aluminium. (AC/DC Machine Only)
REHM Automatic Frequency Control System -
The frequency is automatically adjusted to the current intensity during AC welding. This offers superior arc characteristics along with improved tungsten life and efficiency. For difficult applications, manual adjustment is also available.
> TIGER PULSED TIG WELDING MACHINES - |
||
TIGER |
Pulsed TIG Machines 170 and 210 Amp models |
|
> TIG WELDING MACHINES 230v 1- |
||
|
|
|
> TIGER RWK- |
||
|
|
|
> TIGER CART for Water Cooler |
||
TIGER CART |
|
|
> BOOSTER.PRO DC LIFT- |
||
BOOSTER.PRO |
MMA Inverter Stick Welding Machines |
|
BOOSTER.PRO |
MMA Inverter Stick Welding Machines |
|
